Whether you have a roller garage door or sectional garage door, the overhead garage door works on the operating mechanism of garage door torsion springs. These springs provide enough power to the garage door which enables it to run on the tracks along with the walls of the garage. You need to perform regular garage door maintenance to keep it in good working condition. Moreover, there are couples of simple garage door repairing techniques that you can do on your own.
The metal tracks of the overhead garage door could be the main cause behind the non-working garage door, so inspect them first. If garage door tracks seem loose, merely tightened the screws and nuts will work. You should keep the garage door closed completely while inspecting the tracks to find out flat spots or dents. They will be pounded out with the help of a wooden hammer or rubber mallet. If tracks are badly damaged, you need to call a professional garage door repair companies in the Atlanta area for further assistance.
Make sure that garage door tracks are aligned properly. You can use the balancing scale to confirm the level. Tracks must be of the same height and length to the walls of the garage. If they are not, you will have to lose the mounting brackets which are attached to the garage door to the wall. Be careful and don’t remove them completely and then tap the tracks to their right position. Check the alignment by testing the garage door performance. Don’t forget to tighten the bolts, screws, or nuts once you have finished. Tracks should be cleaned with the help of mild household cleaners to remove grease and dust but stay away from harsh cleaning chemicals. Focus on the rollers as well. Afterward, wipe the tracks and rollers thoroughly to dry them.
Be careful about the loose hardware on the garage door which should be inspected and tightened. Inspect the plates on the overhead garage door where the springs are connected. Confirm that all the nuts and screws inside the metal mounting brackets. In the case of roller garage door, make sure that hinges are not damaged and all the loose nuts and screws are tightened properly. If they seem rusted or damaged, change them immediately. A professional garage door technician will help you here to fix the sagging garage door.
If the garage door troubles are related to the torsion springs, hiring a professional garage door repair company is a more sensible and safer option. Torsion springs are mounted in pairs on the top of the garage door opening. If one of them is damaged, the other working springs carry a considerable amount of tension which can be very dangerous if you try to attempt fixing work. It is always suggested to hire a professional garage door expert to handle the torsion springs.
Safety will be your top concern at all the time while conducting DIY garage door repair work. garage door repair project poses many threats which you should be aware of. The garage door and its springs can collapse at any time if they are not handled properly. A broken garage door can cause injuries or even death. So, be careful, any silly mistake can cause severe damages.